Just started the download process! Thanks all that are involved

Quote from MechaHurtz on November 27, 2019, 12:47 pm

Hello all,

When attempting to download these packs via NZB (using sapNZBd) I get the error that they are encrypted. Is this normal or do I need to use a different client?

Any help is appreciated. Thanks.

Go into SabNZB config settings, then click switches tab at top. Scroll part of the way down under Queue section, in that area you will see something called "Allow Proper Releases". Turn Off "Action when encrypted RAR is downloaded". Save changes at bottom. This should fix that. With NZBs large in size, sabnzb will give false positive alerts, that its encrypted.

Hope This Helps!!

Quote from alexito82 on December 4, 2019, 4:32 pm

Too many configuration failures it contains, you have to reconfigure many things, too many, the gamepad does not work, in addition, if you want to run it with windows 10 you will have to download the latest update of hyperspin since if not, it does not start. Need too much work. It already happened to me with another build that I downloaded from 2tb and I had to configure almost everything myself manually. It is possible to access the menu wheel and see all systems including "NETFLIX" ????? but only the up or down arrows work, you can't even get out if it's not forcing the closure.

Thanks anyway for the contribution !!!!!

 

P.D.

I have downloaded absolutely all the files without failures, but this story is what there is.

Exactly what ninja said. Those errors will actually be fine. They just modified the module files and used on other systems. Those errors will not stop RL from working. Just don't update modules and all is fine. If you want to see all the wheels and modify/delete, then use HyperHQ 1.5.1.0, and delete away.

Quote from manitou153 on December 13, 2019, 5:03 pm

Hi to all

I have updated hyperspin files wtth the latest version that normally work with Windows10.

But, hyperspin doesn't start…

Have you an idea for me ?

Many thanks.

The same thing happens to me, it doesn't start in windows 10

Ok so i have this all set up but it doesn't see my XBOX 360 Wireless controllers. They work perfectly with Coin Ops Next and CP78 straight out of the box. I thought this build was also set up for XBOX 360 controllers. I have not used Hyperspin before, where do I go to set up the controllers for the front end? I am sure I am missing something simple here, if anyone can help point me in the right direction that would great. Worst case Scenario I will just go back to Coin-Ops NEXT and install the packs for that.

Hyperspin HQ and enable the controllers was what I needed to do under controllers. So now I have the controllers working on the front end but there now appears to be other issues to deal with.

The main thing is, START+SELECT do not exit the game. I think this might be a Rocket Launcher setting.

Even if I do get that working there is the whole cluttered wheel, it jumps to the games specific page too quickly and as the wheel doesn't seem to respond as quickly as other front ends such as Coin-Ops or Attract mode it can skip selections as you have to page up and down so quickly so it doesn't just bring up that games screen. Admittedly this could be personal taste but the interface certainly is a lot more resource hungry than others.

Another thing is I am not a fan of having separate sections for CPS1, CPS2 etc. Most people just expect all this under arcade and then will just go to the game they are after. Breaking it down too much like this is just confusing for the average person to step up and find what they want.

I am going to see if I can get this collection set up with Attract mode, I figure this is probably not much more work than trying to sort out this pack under Hyperspin.

I'm running into a problem in which Hyperspin/RocketLauncher closes the emulator I'm running whenever I hold down Button 7 (or the left rear shoulder button) on my controller. I've tested this with multiple emulators and the two working controllers I have (a PS4 and Switch Pro controller). I've looked at most of the main controller settings and I haven't seen anything assigning button 7 as exit. Even stranger is that it only closes when button 7 is held for 2-3 seconds and not when it is normally pressed/tapped. Anyone run into the same problem?

Hey All, Well when you said this was a WIP and a community effort, man you weren't lying. It took me 2 weeks to download ALL 17 parts because there wasn't that many seeding, but here we are. I've been using Hyperspin for years and thought I would give this a go. So far I've had to fix some directory issues, some dead wheel categories (still working on those), I remapped the whole Xbox controller fiasco since my controller (mad cats xbox knockoff) didn't work, that's on my end though. As far as media, that's fine, but I'll be updating the video snaps to HD with my EmuMovies lifetime subscription. Overall it's an OK build but to get it to 100% is going to take some time, work, and effort for sure. If need be, the people that put this thing together, one name stood out was Simply Austin, welcome back brother by the way, and others if interested I can give my input and go from there. Thanks and I'll post more as I update.