Home › Forums › Raspberry Pi, Odroid and all SBCs › Raspberry Pi Images › [1tb]-Retro.Power.Edition.RPi4-RickDangerous – Error during First Boot › Reply To: [1tb]-Retro.Power.Edition.RPi4-RickDangerous – Error during First Boot
Confirmed working with the WD SN550, the WD SN850 draws too much power for the RPi4 to boot. So I can’t say for sure if the newer SN570 would work for this build, it may draw too much power. I think SN570 is probably fine since it’s also Interface PCIe Gen 3×4 NVMe; if someone gets it working please confirm. The 1TB Sandisk SD card that was confirmed working by developer did not work for me. I purchased brand new but there’s a possibility that it corrupted during writing. SD Cards corrupt pretty easily. I’d recommend using the SN550 for this image, you will need to use the RPI Image Writer tool to write a bootloader update to an SD card to flash the RPi4 firmware to boot from USB first.
Excellent build overall, the best one yet for the RPi.