Forum Navigation
You need to log in to create posts and topics.

Problems to use [256GB]-Odroid.XU4 Extreme.Rawer-PiPiggies



I've some problems to use this image.

This image works correctly on my Odroid XU4. This is really awesome. It's the best game collection I've seen for Odroid.

However, I cannot use my Xbox 360 controller. I've seen that I have to install xboxdrv. I don't manage to install it nor to update system (the internet connection seems to not work at all).

Any idea ?

Thanks in advance

Arnaud LEF97

Hello i have no answer for your question, i have an problem with this image. On which way do you write the image to the sd card and which sd card do you use? I have testet it with etcher and windows image writer, but every time it breaks. Any idea? Or tel me your way. Thanks


I used Etcher directly with a hard drive (1 TO). No error and the system works fine.

best regards

Hmm... can i use an microsd with this big image? The program tells me that my storage, port or reader is corrupt. But everything is new. And i tested another port. I must write download iso file. Should i unzip it again?


Il should work with a microSD card.

However, i've seen a lot of message with the same problem:

No solution for the moment.


I can't even use etcher to write the image to my sd card because it says I don't have enough space. Rufus and Windiskimgr will write it but so far the image has not worked in my Odroid. Not sure what to do now.

How does it work with HDD? How should I go?


I used Etcher like with a SD card.

No change to do with the ODROID XU4.

However, I didn't manage to boot using the HDD directly. So, I plug the HDD and use a SD card with a minimal system.

The image I use for the SD card is OGST ( ODROID-GameStation-Turbo-3.9.5-20171115-XU3+XU4-Jessie ) but it should work using another system.

I hope this could help you

If you are having problems with an XBOX 360 compatible controller (as I was) you need to install the XBOX driver under Retropie/Retropie settings. In order to do that you must be connected to the internet either by wired connection or a compatible wifi dongle (Odroid does not have built in wifi or bluetooth.)

The WIFI must be setup through the ODROID Toolbox only. you cannot set it up in retro pie.

The symptoms of the missing driver is that the controller appears to work in navigating emulation station, but can't start or play games (no fire button, can't start etc.)

I hope this helps. If you want to use a PS3 controller, there is a driver for that also in the same location. There is a great video on setting up the Odroid XU4 right here on Arcade is by Level1. I recommend you watch it. the controller stuff starts at 11:15 minutes into it.

Now, Can someone help me with my problem: Atari 8 Bit does not work at all. All I get when selecting any game is a small white box in the center of my screen with a faint image of the fuji symbol. Everything else works greats (other systems) but not Atari 8 bit. Any idea as to what is wrong?

Thanks in advance for any help suggestions

Here is the youtube posting for the video mentioned above:

I recommend watch it all it will answer a lot of questions.



This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More