RetroPie Beginner’s Tutorial (PART 2) by Level1online (Late 2018)

PART 1: https://youtu.be/xEwX1f33hBQ YB’s V2 Update files: https://www.dropbox.com/s/cw9pmfvhzklge89/Sega%20YB%20Version%202.zip?dl=0 Link to Arcade Punks: https://www.arcadepunks.com Link to RetroPie Toolkit: https://shakz76.github.io/Eazy-Hax-RetroPie-Toolkit/ EasyHax Channel: https://youtu.be/sBw9M-8PkIM My PC Specs: Windows 7 Professional 64-bit SP1 Intel Core i5 4690 @ 3.50GHz Haswell 22nm Technology 16.0GB Dual-Channel DDR3 @…

The Rom Situation w/ Level1online

This is my opinion and outlook on what is going in the rom community. Yall need to chill…. My PC Specs: Operating System Windows 7 Professional 64-bit SP1 CPU Intel Core i5 4690 @ 3.50GHz Haswell 22nm Technology RAM 16.0GB Dual-Channel DDR3…

PSP Gameplay on Raspberry Pi 3 B+ (RetroPie/PPSSPP)

PPSSPP Settings are shown in the video, just hit pause towards the end. Here are my overclock settings in /boot/config.txt arm_freq=1500 gpu_freq=500 core_freq=500 sdram_freq=500 sdram_schmoo=0x02000020 over_voltage=6 sdram_over_voltage=2 Thanks to ETA Prime for his overclock guide: https://youtu.be/aT0OX8TXRCM The video output is 720p, but…

RetroPie Install Raspberry Pi B+ Raspian Stretch

Step 1:Download Raspian Stretch https://www.raspberrypi.org/downloads/raspbian/ Step 2: follow guide https://www.raspberrypi.org/learning/software-guide/update-sd-card/ Step 3: manual install RetroPie https://retropie.org.uk/docs/Manual-Installation/ Step 4: install packages including xpad driver, and set emulation station as first boot up item Step 5: make sure Samba is installed, drag roms over…

RetroPie Guide for Lower Resolution Monitors Retroarch

Video tutorial on Setting up your RetroPie on a 720p display Smaller RetroArch Screen Article: https://github.com/RetroPie/RetroPie-Setup/wiki/Smaller-RetroArch-Screen Useful Commands in Putty.exe: sudo ./RetroPie-Setup/retropie_setup.sh sudo nano /boot/config.txt sudo reboot sudo poweroff sudo raspi-config config.txt settings: hdmi_group=1 hdmi_mode=4 Retroarch.cfg settings: custom_viewport_width = “480” custom_viewport_height =…