Step by step instructions for building a custom vertical image. This is the image I built for my Bartop. This will get you up and running on the latest retropie – you should also be able to do this on the odriod, tinkerboard, and pi 3. You can add even more and do even more customization and add even more games!
In your config.txt file add:
“display_rotate=1” 90 degrees
OR
“display_rotate=3” 270 degrees
DOWNLOAD THE ROMS FROM OUR ROMSETS PAGE NOW
Title=”vertical_arcade_tate pack_w-media_diegobanjo”
This content is 5 years old. If there is a download link on this page and you expect a torrent to be "well seeded" its VERY unlikely you will have much success - Our revenue funded Seedboxes usually only host for 90 days (more in some "collection" cases). Try requesting it on our forum, or, if available then downloading from another source (for example mega.nz, 1fichier or upto) - The best method of downloading would be .nzb (usenet) as most providers have at least 3 years retention - check out the "how to" on the NZB page - alternatively if you are a member there is a good chance it can be put on the members private FTP. Memberships are OPEN.