Hyperpie v2 PC Edition Install Guide

You need to create a H drive. Either create a new partition, or change the drive letter of your external drive (easiest).

Windows 7 how to:

Windows 10 how to:

Extract the rars (use 7zip) to the root H directory so all the files are extracted and paths are

Once Extracted you are basically ready to play…all you need are games and media. there are two methods to accomplish this.

The first option: Connect your Pi to you Home network, gain access to your rom folder, place all the system rom folders you want from Hyperpie on your Pi and drag and drop them to H:\HyperPC\Roms\

If you have a .img file of your image, or you do not have a pi but you have an image that follows Hyperpie or Motion Blue Rom Naming Standards, (you will need to download and extract the hyperpie image if you don’t have one) you can use 7.Zip to open the img and move the folders over. just right click the .img file, and open archive, then open the .img file it shows, it will open to the file system. Now navigate to home\pi\RetroPie\roms and move the system rom folders over one at a time to H:\HyperPC\Roms

Navigate to H:\HyperPC\RocketLauncher\Media\Fonts and install the BebasNeue.ttf font

If you are using an XBOX 360 controller and all your drivers, direct x, and runtimes are up to date you are now ready to play by opening the attract.exe shortcut.

*If you run into errors, or you are unsure you have all the right drivers, navigate to H:\HyperPC\Utilities. From here run the DXSETUP.exe shortcut, and all the Vcredist_64.exe files. This should take care of all emulator issues