Let’s take a look at the all-new NanoPC T4 from Friendly Arm, Its powered by a Rockchip 3399 6 core CPU Mali 860MP4 GPU and backed by 4GB’s of Ram it runs Android or Linux but in this video I’m testing Android 7.1.2 first.
Buy One From Friendly Arm’s Website: http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=225
Full Specs:
CPU Model: Rockchip RK3399
Number of Cores: 64-bit Dual Core Cortex-A72 + Quad Core Cortex-A53
Frequency: Cortex-A72(up to 2.0GHz), Cortex-A53(up to 1.5GHz)
GPU Mali-T864 GPU,supports OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC
VPU 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc
Memory RAM: Dual-Channel 4GB LPDDR3-1866
Storage eMMC: 16GB
MicroSD Slot: MicroSD*1 for external storage up to 128GB
PCIe*1: M.2 M-Key PCIe X4 socket, compatible with PCIe 2.1, Dual operation mode;
Onboard M3 PCB nut for mounting M.2 2280 module
Power Management RK808-D PMIC, cooperated with independent DC/DC, enabling DVFS, solfware power-down, RTC wake-up, system sleep mode
Connectivity Ethernet: Gbps Ethernet
Wi-Fi: 802.11a/b/g/n/ac
Bluetooth: 4.1 dual mode
Antenna: Dual Antenna Interface
Audio Audio Out: 3.5mm Dual channel headphone jack, or HDMI
Audio In: Onboard microphone
Video Input 2*4-Lane MIPI-CSI, dual ISP, up to 13MPix/s,supports simultaneous input of dual camera data
Video Output HDMI: HDMI 2.0a, supports [email protected],HDCP 1.4/2.2
DP on Type-C: DisplayPort 1.2 Alt Mode on USB Type-C
LCD Interface: one eDP 1.3(4 line,10.8Gbps), one 4-Line MIPI-DSI
USB USB 2.0*2: independent native USB 2.0 Host A interfaces
USB 3.0*1: native USB 3.0 Host A type interface
USB Type-C*1: Supports USB3.0 Type-C and DisplayPort 1.2 Alt Mode on USB Type-C
Pin-header 40Pin GPIO Extension ports:
1 X 3V/1.8V I2C, up to 2 x 3V UART, 1 X 3V SPI, 1 x SPDIF_TX, up to 8 x 3V GPIOs 1 x 1.8V I2S, 3 x 1.8V GPIOs
ADC: 3*1.8V ADC inputs, 5 Pin 2.54mm header
Debug: 1*Debug UART, 4 Pin 2.54mm header, 3V level, 1500000bps
User Key Power Key*1
Reset Key*1
MASKROM(BOOT) Key*1
Recovery*1
LED Power LED(Red)*1
STAT LED(Green)*1
Others IR reciver: Onboard IR reciver, Acceptes 38KHz carrier frequency
RTC Battery: 2 Pin 1.27/1.25mm RTC battery input connector
Cooling: two 2.5mm PCB nuts for mounting heat sink; 3 Pin 12V cooling fan interface with PWM
Working Temperature: -20℃ to 70℃
Power DC 12V/2A