Will the New ODROID H2 handle 3DS Emulation?
In this video, I test out the Citra 3DS emulator on the all-new ODRId H2 mini PC/SBC
Ameridroid: https://ameridroid.com/
Specifications
Form Factor
Dimensions: 110mm x 110mm x 47mm
Weight: 285 g including heatsink
Processor
Intel Celeron J4105 Processor (14nm, TDP 10W)
Up to 2.5Ghz(Single Thread) or 2.3Ghz(Multi Thread)
4MB L2 Cache
UHD Graphics 600 (Gen 9.5 LP GT1 up to 700MHz)
Fan-less design
Memory
2 x DDR4 1.2V SO-DIMM slots
Dual Channel, up to 2400 MT/s (DDR4-PC19200)
Max memory capacity 32GB
DDR3 is not supported
Storage
1 x eMMC connector (bootable and selectable on BIOS)
Various eMMC modules can be purchased at Hardkernel store
2 x SATA3 6Gbps
1 x M.2 NVMe slot (PCIe 2.0 x 4, supports NGFF-2280 cards)
M.2 SATA SSD is not supported
Networking
2 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps)
Realtek RTL8111G
Supports Wake-On-Lan
LED indicators (Green: Link, Amber: Traffic)
Video
1 x DisplayPort 1.2 (up to [email protected])
1 x HDMI 2.0 (up to [email protected])
Dual simultaneous display support
Audio
1 x Audio out (3.5mm jack)
1 x Audio in (3.5mm jack)
1 x SPDIF out (ALC662, HDA codec)
External I/O
2 x USB 3.0 Host ports
2 x USB 2.0 Host ports
1 x Peripheral Expansion Header (20-pin, 2.54mm pitch)
1 x DC 5V, 1 x DC 3.3V, 5 x GND
2 x UART (TXD/RXD/RTS/CTS)
2 x I2C (SCL/SDA)
1 x External Power Button
All 3.3V I/O signal level
Other features
Passive Heatsink
BIOS Backup Battery
Maintains system time and BIOS settings
Power Button
Reset Button
System LEDS Indicators:
Red (PWR) – Solid light when DC power is supplied
Blue (left, ALIVE) – Solid light when System is running
Blue (right, RESET) – When the RESET button is pressed
Amber (SATA) – Flashes when there is data transfer
Green (NVMe) – Flashes when there is data transfer
Active Cooling Fan Connector (5V 4-pin, PWM input + TACHO output)
Active Cooling Fan is optional
Connector (4-pin, 1.25mm pitch)
Power
1 x DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm
DC 14V ~ 20V (up to 60W)
DC 15V/4A power adaptor is recommended
Power consumption:
IDLE : ≃4W
CPU Stress : ≃14W
CPU+GPU Stress : ≃22W
Power-off : ≃0.5W
Suspend : ≃0.6W
#odroid #SBC #ETAPRIME
