So we are sitting here in the office playing mindless violence video games and we get an inbox “I have a 128gb image, that is perfect…I am French but my English is good…..” , so we say “sure lets take a look”, to which we then see this…..
From the Author…
I start from a Rey’s work that provided very good Retropie attract image.
So I have :
- Added some emulators (Amstrad, 3do (experimental), Dreamcast, Game and watch, …)
- reset and change some
- Reduce and merge lists of roms / systems (cps, snes etc …),
- Create some system themes (Dreamcast, Psx, pc engine, amstrad, master system, famicom, etc …) 19 in total.
- Create artwork and wheel (general menu wheel, some Rom wheel, …),
- Find and re-encode videos (systems and Roma)
- Update attract, retropie, retroarch etc …..
- And more..
Systems List :
Top 100 Collection
Game and Watch
NEC PC Engine
Nintendo Famicom Disk System
Nintendo Virtual Boy
Nintendo Game Boy
Nintendo Gameboy Color
Nintendo Gameboy Advance
Sega Master System
Sega Mega Drive
SNK Neo Geo Pocket
SNK Neo Geo Poket Color
SNK Neo Geo
Double Dragon Collection
Donkey Kong Collection
Street Fighter Collection
Mortal Kombat Collection
1 / Choose an SD 128Gb (mine is a Samsung bought on Amazon)
2 / Format your SD: I advise guiformat (included in the torrent). On large capacity cards (64 or 128GB) SDformator does not format in FAT32 and this makes the SD not readable on the PI.
3 / Put the SD card in your PI
4 / If you are in wireless controller xbox360 -> your done
5 / If not : Connect a USB keyboard or 2.4GHZ dongle etc.
6 / Go to the red icon
7 / Go to « Start emulationstation»
8 / Configure the new game controller:
A) If you are classic USB PAD or another pad managed by the “xpad” driver: go to “retropie setup” with the arrows and keys of the keyboard and made input config (press “ok” on the keyboard then press “S”. Follow the instructions for the different buttons of your controller. Repeat the same steps for the second controller.
B) If you are PS3 controller go in: “Retropie” “Retropie setup” “manage package” “manage driver package”
Once the drivers are installed you must register your controller (plug in usb, then remove, then press the PS key to turn on your controller).
Repeat the operation for the second controler (just repeat the aperation step).
Go back / back / exit and press “ok”, go to “imput config” and press “S” in the main menu to configure the keys of your PS3 controler.
C) You now need to configure your new controller in MAME and possibly the N64 emulator (both are not managed by RETROARCH). Go to MAME to start a game, click on TAB.
NB: if you are in ps3 controller you can directly replace the files by SSH of the folder config of retropie (PS3.rar)
9 / Go to “retropie” then “Restart in attract mode”
Latest posts by Arcade Punk (see all)
- VertiWild 1.6 – Vertical Fully Loaded Pi AttractMode from WildPumpk1n - April 23, 2019
- Arcade 1up Retropie Ready Remixed RetroRama Pi Image from Rival Boss - April 19, 2019
- 256gb Retro Paradise Retropie Raspberry Pi Image from Virtualman - April 16, 2019